M A T E R I A L   S A F E T Y   D A T A   S H E E T
 
TENACO CATALYST FAST PRIMER PART-B 1-GAL Page: 1
 
PRODUCT NAME: TENACO CATALYST FAST PRIMER PART-B 1-GAL       HMIS CODES: H F R P
PRODUCT CODE: TENCATFAST-1                                               2 2 1 I
 
==================  SECTION I  –  MANUFACTURER IDENTIFICATION  =================
 
MANUFACTURER’S NAME: Viking Paints Inc.
ADDRESS            : 100 WEST 78TH ST.
                     RICHFIELD,MN 55423
 
EMERGENCY PHONE    : 1-800-535-5053 24HRSDATE PRINTED     : 2/6/2009
INFORMATION PHONE  : 1-612-866-1212      NAME OF PREPARER : T. KINSELLA
 
==========  SECTION II  –  HAZARDOUS INGREDIENTS/SARA III INFORMATION  =========
 
                                                                                  VAPOR PRESSURE       WEIGHT
REPORTABLE COMPONENTS                                              CAS NUMBER       mm Hg @ TEMP       PERCENT
————————————————————————————————————————
SOLVENT NAPATHA(PETROLEUM)LIGHT AROMATIC                           64742-95-6     4.8      100F.    15% TO 20%
       OSHA: PEL/TWA 50 PPM     ACGIH: TLV/TWA 50 PPM
TALC HYDROUS MAGNESIUM SILICATE                                    14807-96-6                       15% TO 20%
       TWA/TLV 2 mg/m3   OSHA/ACGIH
* XYLENE (MIXED ORTHO,META AND PARA ISOMERS)                       1330-20-7      6        68F      10% TO 15%
       OSHA PEL/TWA: 100 PPM          OSHA PEL/STEL: 150 PPM
       ACGIH TLV/TWA: 1OO PPM         ACGIH TLV/STEL: 150 PPM
       LD50 ORAL: 4.3 G/KG (RAT)      LD50 DERMAL: 3.95 ML/KG (RABBIT)
       LC50 INHALATION: 5000 PPM/4H (RAT)
       SARA HEALTH ASSESSMENT RANK 72
* n BUTYL ALCOHOL                                                  71-36-3        5.9      68       5% TO 10%
       OSHA PEL: 50PPM SKIN, ACGIH TLV: 50PPM SKIN, MFG’S.: N/A
* ETHYLBENZENE                                                     100-41-4       7.1      68F      3% TO 4%
       OSHA PEL/TWA: 100PPM          OSHA PEL/STEL: 125PPM
       ACGIH TLV/TWA: 100PPM         ACGIH TLV/STEL: 125PPM
       LD50 ORAL: 3500 MG/KG (RAT)   LD50 DERMAL: 17800 MG/KG (RABBIT)
       LC50 INHALATION: LCLO: 400PPM/4H (RAT)
       SARA HEALTH ASSESSMENT RANK 69
* METHYL ISOBUTYL KETONE                                           108-10-1       15       68       1% TO 2%
       OSHA PEL: 50 PPM, ACGIH TLV: 50 PPM, MFG’S.: N/A
* ETHYLENE GLYCOL BUTYL ETHER                                      111-76-2       0.6      68F.     1% TO 2%
       OSHA PEL: 25PPM SKIN, ACGIH TLV: 25 PPM
CRYSTALLINE SILICA QUARTZ                                          14808-60-7                          .16
       AS SILICA (QUARTZ) “AS RESPIRABLE DUST”
       LISTED AS A CARCINOGEN BY IARC & ANTICIPATED AS, BY NTP
       TWA/TLV 0.1 mg/m3 OSHA/ACGIH
 
 
* Indicates chemical(s) subject to the reporting requirements of section 313 of Title III and of 40 CFR 372.
T/S=TRADE SECRET N/A=NOT AVAILABLE N/E=NOT ESTABLISHED
 
===============  SECTION III  –  PHYSICAL/CHEMICAL CHARACTERISTICS  ============
 
BOILING RANGE: 0 deg F – 320F.          SPECIFIC GRAVITY (H2O=1): 1.337
VAPOR DENSITY: HEAVIER THAN AIR         EVAPORATION RATE: SLOWER THAN ETHER
COATING V.O.C.: 4.737 lb/gl             MATERIAL V.O.C.: 4.737 lb/gl
SOLUBILITY IN WATER: NON SOLUBLE
APPEARANCE AND ODOR: BLUE OR BLUE ACCENT LIQUID,AROMATIC ODOR
 
=================  SECTION IV  –  FIRE AND EXPLOSION HAZARD DATA  ==============
 
 

 
M A T E R I A L   S A F E T Y   D A T A   S H E E T
 
TENACO CATALYST FAST PRIMER PART-B 1-GAL Page: 2
 
FLASH POINT: 60 deg F                   METHOD USED: TCC
FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: 0          UPPER: 11.2
 
EXTINGUISHING MEDIA: USE “ALCOHOL” FOAM, CO2, DRY CHEMICAL, WATER FOG
 
SPECIAL FIREFIGHTING PROCEDURES
Full protective equipment, including self-contained breathing apparatus, is recomended.Water from fog nozzles may be
used to cool closed containers to prevent pressure build up.
 
 
UNUSUAL FIRE AND EXPLOSION HAZARDS
WHEN HEATED ABOVE THE FLASH POINT, EMITS FLAMMABLE VAPORS WHICH, WHEN MIXED WITHAIR, CAN BURN OR BE EXPLOSIVE. FINE
MISTS OR SPRAYS MAY BE FLAMMABLE AT TEMPERATURES BELOW THE FLASH POINT.
 
 
========================  SECTION V  –  REACTIVITY DATA  =======================
 
STABILITY: STABLE
CONDITIONS TO AVOID
Also refer to sections IV, VI, VII & VIII.
 
INCOMPATIBILITY (MATERIALS TO AVOID)
None reasonably foreseeable.
 
HAZARDOUS DECOMPOSITION OR BYPRODUCTS
CO, CO2, SMOKE.
 
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR
 
====================  SECTION VI  –  HEALTH HAZARD DATA  =======================
 
INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
EYE WATERING, HEADACHES, NAUSEA, DIZZINESS AND LOSS OF COORDINATION. EXCESSIVE INHALATION OF VAPORS IN HIGH CONCENTRA-
TIONS MAY RESULT IN NARCOSIS.(CENTRAL NERVOUS SYSTEM DEPRESSION).
 
 
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Skin: Prolonged or repeated exposure can cause moderate irritation, defatting, and dermatitis. Eyes: Severe irritation,
redness, tearing and blurred vision.
 
 
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Repeated exposure of the skin to this product can lead to redness or irritation of the skin. Skin redness or skin rash
may be early signs of potential dermatitis. Avoid repeated skin contact
 
 
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Gastrointestinal irritation, nausea,vomiting and diarrhea. Aspiration of material into lungs can cause chemical
pneumonitis which can be fatal.
 
 
HEALTH HAZARDS (ACUTE AND CHRONIC)
CHRONIC EXPOSURE MAY CAUSE DAMAGE TO THE CENTRAL NERVOUS SYSTEM, RESPIRATORY SYSTEM, LUNGS, EYES, SKIN, GASTROINTEST-
INAL TRACT, LIVER, SPLEEN AND KIDNEYS.
 
 
CARCINOGENICITY:  NTP CARCINOGEN: Yes  IARC MONOGRAPHS: No   OSHA REGULATED:
                                                            No
 

 
M A T E R I A L   S A F E T Y   D A T A   S H E E T
 
TENACO CATALYST FAST PRIMER PART-B 1-GAL Page: 3
 
 
LABORATORY STUDIES WITH RATS HAVE SHOWN THAT PETROLEUM DISTILLATES CAUSE KIDNEY OR LIVER TUMORS.SEVERAL STUDIES OF
PETROLEUM WORKERS HAVE NOT SHOWN A SIGNIFICANT INCREASE IN KIDNEY OR LIVER TUMORS.
 
 
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE
Any person with known medical problems with lungs or skin need a doctor’s opinion as to working with this product.
 
EMERGENCY AND FIRST AID PROCEDURES
INHALATION: REMOVE TO FRESH AIR. IF BREATHING DIFFICULTY PERSISTS CONSULT A PHYSICIAN.  EYE CONTACT: FLUSH WITH WATER
FOR AT LEAST 15 MINUTES; CALL A PHYSICIAN.  SKIN CONTACT: WASH WITH SOAP AND WATER. IF IRRITATION OCCURS CONSULT
PHYSICIAN.  INGESTION: IN THE UNLIKELY EVENT OF INGESTION, CALL A PHYSICIAN IMMEDIATELY AND HAVE THE NAMES OF
INGREDIENTS AVAILABLE.
 
 
===========  SECTION VII  –  PRECAUTIONS FOR SAFE HANDLING AND USE  ============
 
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
Ventilate area. Remove sources of ignition. Prevent skin contact & breathing of vapor. Wear properly fitted NIOSH/MSHA
vapor/particulate respirator. Confine and remove material with inert absorbent.
 
 
WASTE DISPOSAL METHOD
Do not allow material to contaminate ground water systems. Incinerate absorbed material in accordance with federal,
state, and local requirements. Do not incinerate in closed containers.
 
 
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING
Observe label precautions. Keep away from heat, sparks and flame. Close container after each use. Ground containers when
pouring. Wash thoroughly after handlingand before eating or smoking. Do not store above 120 degrees F.
 
 
OTHER PRECAUTIONS
Do not sand, flame cut, braze or weld dry coating without a NIOSH/MSHA approved respirator or appropriate ventilation.
All solvent vapors are heavier than air and can stratify if air is not exhausted. Turn off all pilot lights or sources
of open flame, sparks and ignition.
 
 
=====================  SECTION VIII  –  CONTROL MEASURES  ======================
 
RESPIRATORY PROTECTION
WEAR A PROPERLY FITTED VAPOR/PARTICULATE RESPIRATOR APPROVED BY NIOSH/MSHA (TC-23C)FOR USE WITH PAINTS DURING APPLICA-
TION AND UNTIL ALL VAPORS AND SPRAY MISTS ARE EXHAUSTED. IN CONFINED SPACES OR WHERE CONTINUOUS SPRAY OPERATIONS ARE
TYPICAL, WEAR A POSITIVE-PRESSURE, SUPPLIED AIR RESPIRATOR (TC-19C). FOLLOW RESPIRATOR MANUFACTURER’S INSTRUCTIONS.
 
 
VENTILATION
PROVIDE SUFFICIENT VENTILATION IN VOLUME AND PATTERN TO KEEP CONTAMINANTS BELOW THE TLV LIMIT AND APPLICABLE OSHA
REQUIREMENTS. EXHAUST AIR MAY NEED TO BE CLEANED BY SCRUBBERS OR FILTERS TO REDUCE ENVIRONMENTAL CONTAMINATION.
 
 
PROTECTIVE GLOVES
Neoprene gloves are recommended.
 
EYE PROTECTION
Desirable in all industrial situations. Include splash guards or side shields.
 
OTHER PROTECTIVE CLOTHING OR EQUIPMENT
 

 
M A T E R I A L   S A F E T Y   D A T A   S H E E T
 
TENACO CATALYST FAST PRIMER PART-B 1-GAL Page: 4
 
Rubber apron and coveralls are recommended.
 
WORK/HYGIENIC PRACTICES
Do not breathe vapors or mists.
 
=========================  SECTION IX  –  DISCLAIMER  ==========================
 
The information in this MSDS is provided without any representation or warranty expressed or implied,regarding its
accuracy or completeness. The handling,storage, use & disposal of the product are beyond our control. We do not assume
responsibility & disclaim liability for loss,damage or expense connected with the handling, storage, or use of product.