M A T E R I A L S A F E T Y D A T A S H E E T | |||
TENACO CATALYST GLOSS PART-B 1-GAL. | Page: 1 | ||
PRODUCT NAME: TENACO CATALYST GLOSS PART-B 1-GAL. HMIS CODES: H F R P | |||
PRODUCT CODE: TENCATGLOSS-1 2 2 1 I | |||
================== SECTION I – MANUFACTURER IDENTIFICATION ================= | |||
MANUFACTURER’S NAME: Viking Paints Inc. | |||
ADDRESS : 100 WEST 78TH ST. | |||
RICHFIELD,MN 55423 | |||
EMERGENCY PHONE : 1-800-535-5053 24HRSDATE PRINTED : 2/6/2009 | |||
INFORMATION PHONE : 1-612-866-1212 NAME OF PREPARER : T. KINSELLA | |||
========== SECTION II – HAZARDOUS INGREDIENTS/SARA III INFORMATION ========= | |||
VAPOR PRESSURE WEIGHT | |||
REPORTABLE COMPONENTS CAS NUMBER mm Hg @ TEMP PERCENT | |||
———————————————————————————————————————— | |||
* XYLENE (MIXED ORTHO,META AND PARA ISOMERS) 1330-20-7 6 68F 30% TO 35% | |||
OSHA PEL/TWA: 100 PPM OSHA PEL/STEL: 150 PPM | |||
ACGIH TLV/TWA: 1OO PPM ACGIH TLV/STEL: 150 PPM | |||
LD50 ORAL: 4.3 G/KG (RAT) LD50 DERMAL: 3.95 ML/KG (RABBIT) | |||
LC50 INHALATION: 5000 PPM/4H (RAT) | |||
SARA HEALTH ASSESSMENT RANK 72 | |||
* n BUTYL ALCOHOL 71-36-3 5.9 68 5% TO 10% | |||
OSHA PEL: 50PPM SKIN, ACGIH TLV: 50PPM SKIN, MFG’S.: N/A | |||
* ETHYLBENZENE 100-41-4 7.1 68F 5% TO 10% | |||
OSHA PEL/TWA: 100PPM OSHA PEL/STEL: 125PPM | |||
ACGIH TLV/TWA: 100PPM ACGIH TLV/STEL: 125PPM | |||
LD50 ORAL: 3500 MG/KG (RAT) LD50 DERMAL: 17800 MG/KG (RABBIT) | |||
LC50 INHALATION: LCLO: 400PPM/4H (RAT) | |||
SARA HEALTH ASSESSMENT RANK 69 | |||
SOLVENT NAPATHA(PETROLEUM)LIGHT AROMATIC 64742-95-6 4.8 100F. 5% TO 10% | |||
OSHA: PEL/TWA 50 PPM ACGIH: TLV/TWA 50 PPM | |||
TERT-BUTYL ACETATE 540-88-5 34 77F. 5% TO 10% | |||
US (ACGIH) 2003 200PPM 8-HRS/TWA | |||
US (OSHA) 2001 200PPM/950 mg/m3 8-HRS/TWA | |||
* ETHYLENE GLYCOL BUTYL ETHER 111-76-2 0.6 68F. .01% TO .09% | |||
OSHA PEL: 25PPM SKIN, ACGIH TLV: 25 PPM | |||
* Indicates chemical(s) subject to the reporting requirements of section 313 of Title III and of 40 CFR 372. | |||
T/S=TRADE SECRET N/A=NOT AVALIBALE N/E=NONE ESTABLISHED | |||
=============== SECTION III – PHYSICAL/CHEMICAL CHARACTERISTICS ============ | |||
BOILING RANGE: 0 deg F – 320F. SPECIFIC GRAVITY (H2O=1): .903 | |||
VAPOR DENSITY: HEAVIER THAN AIR EVAPORATION RATE: SLOWER THAN ETHER | |||
COATING V.O.C.: 4.514 lb/gl MATERIAL V.O.C.: 4.218 lb/gl | |||
SOLUBILITY IN WATER: NON SOLUBLE | |||
APPEARANCE AND ODOR: CLEAR TO AMBER LIQUID,AROMATIC ODOR | |||
================= SECTION IV – FIRE AND EXPLOSION HAZARD DATA ============== | |||
FLASH POINT: 39.92F. METHOD USED: TCC | |||
FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: 0 UPPER: 11.2 | |||
EXTINGUISHING MEDIA: USE “ALCOHOL” FOAM, CO2, DRY CHEMICAL, WATER FOG | |||
M A T E R I A L S A F E T Y D A T A S H E E T | |||
TENACO CATALYST GLOSS PART-B 1-GAL. | Page: 2 | ||
SPECIAL FIREFIGHTING PROCEDURES | |||
Full protective equipment, including self-contained breathing apparatus, is recomended.Water from fog nozzles may be | |||
used to cool closed containers to prevent pressure build up. | |||
UNUSUAL FIRE AND EXPLOSION HAZARDS | |||
WHEN HEATED ABOVE THE FLASH POINT, EMITS FLAMMABLE VAPORS WHICH, WHEN MIXED WITHAIR, CAN BURN OR BE EXPLOSIVE. FINE | |||
MISTS OR SPRAYS MAY BE FLAMMABLE AT TEMPERATURES BELOW THE FLASH POINT. | |||
======================== SECTION V – REACTIVITY DATA ======================= | |||
STABILITY: STABLE | |||
CONDITIONS TO AVOID | |||
Also refer to sections IV, VI, VII & VIII. | |||
INCOMPATIBILITY (MATERIALS TO AVOID) | |||
None reasonably foreseeable. | |||
HAZARDOUS DECOMPOSITION OR BYPRODUCTS | |||
CO, CO2, SMOKE. | |||
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR | |||
==================== SECTION VI – HEALTH HAZARD DATA ======================= | |||
INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE | |||
EYE WATERING, HEADACHES, NAUSEA, DIZZINESS AND LOSS OF COORDINATION. EXCESSIVE INHALATION OF VAPORS IN HIGH CONCENTRA- | |||
TIONS MAY RESULT IN NARCOSIS.(CENTRAL NERVOUS SYSTEM DEPRESSION). | |||
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE | |||
Skin: Prolonged or repeated exposure can cause moderate irritation, defatting, and dermatitis. Eyes: Severe irritation, | |||
redness, tearing and blurred vision. | |||
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE | |||
Repeated exposure of the skin to this product can lead to redness or irritation of the skin. Skin redness or skin rash | |||
may be early signs of potential dermatitis. Avoid repeated skin contact | |||
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE | |||
Gastrointestinal irritation, nausea,vomiting and diarrhea. Aspiration of material into lungs can cause chemical | |||
pneumonitis which can be fatal. | |||
HEALTH HAZARDS (ACUTE AND CHRONIC) | |||
CHRONIC EXPOSURE MAY CAUSE DAMAGE TO THE CENTRAL NERVOUS SYSTEM, RESPIRATORY SYSTEM, LUNGS, EYES, SKIN, GASTROINTEST- | |||
INAL TRACT, LIVER, SPLEEN AND KIDNEYS. | |||
CARCINOGENICITY: NTP CARCINOGEN: No IARC MONOGRAPHS: No OSHA REGULATED: | |||
No | |||
LABORATORY STUDIES WITH RATS HAVE SHOWN THAT PETROLEUM DISTILLATES CAUSE KIDNEY OR LIVER TUMORS.SEVERAL STUDIES OF | |||
PETROLEUM WORKERS HAVE NOT SHOWN A SIGNIFICANT INCREASE IN KIDNEY OR LIVER TUMORS. | |||
M A T E R I A L S A F E T Y D A T A S H E E T | |||
TENACO CATALYST GLOSS PART-B 1-GAL. | Page: 3 | ||
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE | |||
Any person with known medical problems with lungs or skin need a doctor’s opinion as to working with this product. | |||
EMERGENCY AND FIRST AID PROCEDURES | |||
INHALATION: REMOVE TO FRESH AIR. IF BREATHING DIFFICULTY PERSISTS CONSULT A PHYSICIAN. EYE CONTACT: FLUSH WITH WATER | |||
FOR AT LEAST 15 MINUTES; CALL A PHYSICIAN. SKIN CONTACT: WASH WITH SOAP AND WATER. IF IRRITATION OCCURS CONSULT | |||
PHYSICIAN. INGESTION: IN THE UNLIKELY EVENT OF INGESTION, CALL A PHYSICIAN IMMEDIATELY AND HAVE THE NAMES OF | |||
INGREDIENTS AVAILABLE. | |||
=========== SECTION VII – PRECAUTIONS FOR SAFE HANDLING AND USE ============ | |||
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED | |||
Ventilate area. Remove sources of ignition. Prevent skin contact & breathing of vapor. Wear properly fitted NIOSH/MSHA | |||
vapor/particulate respirator. Confine and remove material with inert absorbent. | |||
WASTE DISPOSAL METHOD | |||
Do not allow material to contaminate ground water systems. Incinerate absorbed material in accordance with federal, | |||
state, and local requirements. Do not incinerate in closed containers. | |||
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING | |||
Observe label precautions. Keep away from heat, sparks and flame. Close container after each use. Ground containers when | |||
pouring. Wash thoroughly after handlingand before eating or smoking. Do not store above 120 degrees F. | |||
OTHER PRECAUTIONS | |||
DO NOT SAND, FLAME CUT, BRAZE OR WELD DRY COATING WITHOUT A NIOSH/MSHA APPROVED RESPIRATOR OR APPROPRIATE VENTILATION. | |||
ALL SOLVENT VAPORS ARE HEAVIER THAN AIR AND CAN STRATIFY IF AIR IS NOT EXHAUSTED. TURN OFF ALL PILOT LIGHTS OR SOURCES O | |||
F OPEN FLAME, SPARKS OR IGNITION. | |||
===================== SECTION VIII – CONTROL MEASURES ====================== | |||
RESPIRATORY PROTECTION | |||
WEAR A PROPERLY FITTED VAPOR/PARTICULATE RESPIRATOR APPROVED BY NIOSH/MSHA (TC-23C)FOR USE WITH PAINTS DURING APPLICA- | |||
TION AND UNTIL ALL VAPORS AND SPRAY MISTS ARE EXHAUSTED. IN CONFINED SPACES OR WHERE CONTINUOUS SPRAY OPERATIONS ARE | |||
TYPICAL, WEAR A POSITIVE-PRESSURE, SUPPLIED AIR RESPIRATOR (TC-19C). FOLLOW RESPIRATOR MANUFACTURER’S INSTRUCTIONS. | |||
VENTILATION | |||
PROVIDE SUFFICIENT VENTILATION IN VOLUME AND PATTERN TO KEEP CONTAMINANTS BELOW THE TLV LIMIT AND APPLICABLE OSHA | |||
REQUIREMENTS. EXHAUST AIR MAY NEED TO BE CLEANED BY SCRUBBERS OR FILTERS TO REDUCE ENVIRONMENTAL CONTAMINATION. | |||
PROTECTIVE GLOVES | |||
Neoprene gloves are recommended. | |||
EYE PROTECTION | |||
Desirable in all industrial situations. Include splash guards or side shields. | |||
OTHER PROTECTIVE CLOTHING OR EQUIPMENT | |||
Rubber apron and coveralls are recommended. | |||
WORK/HYGIENIC PRACTICES | |||
Do not breathe vapors or mists. | |||
M A T E R I A L S A F E T Y D A T A S H E E T | |||
TENACO CATALYST GLOSS PART-B 1-GAL. | Page: 4 | ||
========================= SECTION IX – DISCLAIMER ========================== | |||
The information in this MSDS is provided without any representation or warranty expressed or implied,regarding its | |||
accuracy or completeness. The handling,storage, use & disposal of the product are beyond our control. We do not assume | |||
responsibility & disclaim liability for loss,damage or expense connected with the handling, storage, or use of product. | |||